Growing list of our loyal clients |
|
M/S Prai Power, Malaysia
An Independent Power Producer located at Northern part of Malaysia.
Service and Products supplied: Supply of new Electrolyser and spare parts for
Electrolyser . Analysis and troubleshooting of problems in OEM Sanilec Type Electrolyser,
recommendation and implementation of solutions. Design, manufacturing and supply of tailor
made Sacrificial and Impressed Current Cathodic Protection (ICCP) anodes and electrodes for
solving teething problems.
|
|
M/S JIMAH Power, Malaysia
An Independent Power Producer located at Western part of Malaysia.
Service and Products supplied: Supply of new Electrolyser. Analysis and
troubleshooting of problems in OEM DIAKI Type Electrolyser, recommendation and implementation
of solutions. Inspection services for Cathodic Protection system. Design, manufacturing and
supply of Sacrificial Anodes, based on findings during inspection. Manufacturing and supply of
Fire Resistant Conveyor belts. Supply of specialised spool piece and alloy steel pipes and
fittings for boilers. Design, manufacturing, supply and installation of PF ( Pulverised Fuel)
line spools and elbows with and without wear resistant Alumina ceramic lining. Trouble
shooting, identification of defect, design, fabrication, supply and installation of Sled Anode
with Pure Iron anodes for Sea Water Intake Piles ICCP
|
|
M/S Tanjung Bin Power, Malaysia
An Independent Power Producer located at Southern part of Malaysia.
Service and Products supplied: Supply of new Electrolyser. Analysis and
troubleshooting of problems in their mill lub oil system, recommendation and implementation of
solutions. Identification of thinning PF pipe line elbows and its removal and replacement and
advising suitable solution to resolve their wear resistance issues in PF lines. Inspection
services for Cathodic
Protection system.
|
|
M/S Kapar Energy Venture , Malaysia
A Coal Fired Power Plant Power Producer out of joint venture between TNB and Independent Power
Producer Malakoff located at Western part of Malaysia.
Service and Products supplied: Supply of new Electrolyser and spare parts for
Electrolyser, design,manufacturing, supply, installation, testing and commissioning of ICCP
for Jetty and other Cathodic Protection Anodes, Heat Resistant Conveyor Belts, Wire Ropes,
high pressure boiler tubes and fittings made of special alloy. Design, manufacturing, supply
and installation of PF ( Pulverised Fuel) line spools and elbows with and without wear
resistant Alumina ceramic lining. Supply of 15mm thickness special grade Silicone Rubber
Sheets for Skirting application for Two years based on LTSA Contract. Supply of various
instrumentation spares.
|
|
M/S Phalawan Power, Malaysia
An Independent Power Producer located at Western part of Malaysia.
Service and Products supplied: Supply of new Electrolyser of Sanilec design,
Parts of ECP Electrolyser cells , design, supply, installation of Fire Detection and Fire
Suppression System for Generator Enclosure. Overhaul , servicing of Electrolyser of OEM
Sanilec and analysis of findings and recommendation for better maintenance of Electrolyser.
Electrical and Instrumentation cabling work in various places of the plant as part of upgrade
and safety improvement..Supply of various instrumentation spares.
|
|
M/S Panglima Power, Malaysia
An Independent Power Producer located at Western part of Malaysia.
Service and Products supplied: Design, manufacturing and supply of CP Anodes,
reference electrodes.
|
|
M/S Port Said East Power S.E.A, Egypt
An Independent Power Producer owned by (Malaysia’s) Powertek (Edra Energy).
Service and Products supplied: Design,manufacturing and supply of new
Electrolyser equivalent to OEM Denora
|
|
M/S Umicore (M) Sdn Bhd, Malaysia
Fine Zinc Powder Producing plant located at Southern part of Malaysia.
Service and Products supplied: Analysis and troubleshooting of problems in
their Furnace Transformers, recommendation and implementation of solutions. Service provider
to trouble shoot critical and teething problems in their plant.
|
|
Sibu Island Resort,Johor
Corporation,Malaysia
A very well established resort located in an island at Southern part of Malaysia.
Service and Products supplied: Solution provider to plan, design and
implement a Sea Water Electrochlorinator to replace the practice of chlorination using
granular chlorine. Supply of pumps.
|
|
M/S Platinum Biofuels, Malaysia
A Bio Diesel Producing plant located at Western part of Malaysia.
Service and Products supplied:On site repair services for their Tantalum
Bayonet Heat Exchangers. Service provider to formulate and establish Maintenance Plan in their
plant after studying their entire plant.
.
|
|
M/S Possehl Electronics, Malaysia
A leading flexible PCB manufacturer with the manufacturing plant located at the state
of Melaka, Malaysia.
Service and Products supplied:Fabrication and supply of new Platinised
Titanium Multi slot anodes and also refurbishment.
|
|
M/S KOSSAN Latex and Rubber Industries,
Malaysia
A leading manufacturer of gloves with the manufacturing plant located at the highly
industrialised state of Selangor, Malaysia.
Service and Products supplied:Fabrication and supply of new Titanium heat
exchangers, thermo wells and thermocouples.
|
|
M/S Rubberflex, Malaysia
A leading manufacturer of latex threads with the manufacturing plant located at a beautiful
state of Pahang, Malaysia.
Service and Products supplied:Fabrication and supply of new Titanium heat
exchangers, thermo wells, thermocouples and Titanium Pumps.
|
|
M/S Dostek Engineering,Malaysia
A system integrator involved in potable water treatment.
Service and Products supplied: Supply of new Electrolyser.Solution provider
to help Dostek to introduce Brine Water Chlorinator for the Disinfection of potable water in
place of conventional Gas Chlorinator
|
|
M/S Takeuchi MDF Sdn
Bhd,Malaysia
A manufacturer of panel board from wood.
Service and Products supplied:To analyse, recommend and implement solution to
resolve the inefficient combustion problem in the boiler furnace. Service provider to trouble
shoot critical and teething problems in their plant.
|
|
M/S Fabricontrol (M) Sdn
Bhd,Malaysia
An established Electrical and Instrumentation works contractor.
Service and Products supplied:To provide services for participating in high
profile tenders, technical advise during erection and commissioning, project support services
until take over by customer.
|
|
M/S Pristinewater, India
An Electrochlorination Plant Designer,System Integrator and supplier.
Service and Products supplied:Technical support during Technical Bid
Submission, Design, Engineering, Installation,
Testing,Commissioning,Training for customer and handing over.
|
|
M/S PT Cerna Corporation,Philippines
An established leader in process instrumentation measurement and control, has been in the
Philippines market for the past 23 years.
Service and Products supplied: Handing over services for their First ever
Electrochlorination Plant ( 2 x72kph) Project executed at SEM Calaca Power Station ( 2
x300MW), Batangas, Philippines.
|
|
M/S STOMO SUEZ-Tractebel
A well known Power and Desalination Plant O & M Company
Service and Products supplied : Innovative modifications in Siemens make
V94.2 Gas Turbines Combustion Chamber equipment like Ball valves, Flame monitors etc., cable
terminations for ease of removal of Gas Turbine Combustion Chambers during Major Overhauls in
their Sohar Power and Desalination Plant ,Oman
|
|
M/S INTESYS Joint Stock Company, Vietnam
A renowned supplier with core business in proving the equipment and spare parts for Power
Plants belonging to Electricity of Vietnam, Petro Vietnam Power Corporation and other
Industries in Vietnam.
Service and Products supplied : Design, manufacturing and supply of
Sacrificial Anodes as part of their contract for supply of the spare parts for a Combined
Cycle Power Plant of PV Power.
|
|
M/S CV Global Sarana
Mandiri,Indonesia
A renowned supplier with core business in proving the equipment and spare parts for Power
Plants belonging to Indonesian Electricity Board ,Offshore and other Industries in Indonesia.
Service and Products supplied : Design, manufacturing and supply of
Platinised Titanium Anodes as part of their contract for supply of the spare parts for an
Indonesian Power Plant ..
|
|
M/S Norimax Sdn
Bhd,Malaysia
Incorporated in 1999, Norimax is an Integrated Materials Engineering Specialist focusing on
the provision of materials protection and corrosion control products. Norimax has been
recognized by the major oil & gas, power and marine operators as a skilled technology-based
materials engineering specialist in Malaysia.
Service and Products supplied: Design, manufacturing and supply of Copper
Cored Platinised Titanium Anodes for Cathodic Protection in Oil and Gas industry, Supply of CP
cable and MMO coated wire anodes in large quantities. Piggy back connections in large numbers.
|
|
M/S Boustead Naval Shipyard Sdn
Bhd,Malaysia
A one-stop centre for defence and maritime needs. Covering an area of 46 hectares, it was
originally known as the Royal Malaysia Navy Dockyard became fully operational in 1984. They
specialise in Shipbuilding, Ship Repair, Electronics and Weapons.
Service and Products supplied: Design, manufacturing and supply of Zinc
Bracelet Anodes for Cathodic Protection in ships.
|
|
M/S Maltekcon Sdn
Bhd,Malaysia
A manufacturing company and its products and services comprises of DC supply, Digital ammeter,
titanium products and touch pads.
Service and Products supplied: Design, manufacturing and supply of MMO Coated
Titanium Tubular Anodes.
|
|
M/S Shekarian Auto Parts
Co,Dubai
Established in Dubai in 1993. Trading auto spare parts and component. Importing from Far East
such as Japan, Taiwan, China, Malaysia, etc. Exporting to UAE, local market, GCC countries,
North Africa, South Africa. Their products are tyres, auto spare parts such as (Engine Parts,
Suspension Parts, Body Parts, Electronic devices), Batteries, Accessories and Auto Safety and
Sport Equipments.
Service and Products supplied: Design, manufacturing and supply of Titanium
Thermowells.
|
|
M/S ACT Components Technology Sdn Bhd,
Malaysia
Established in year 2000. Have been in the specialized area of design and supplying equipment,
supplying electro mechanical spares part, providing manufacturing and service support to many
wet process industry such as chemical plant, oil and gas industry, waste water treatment
plant, PCB, connectors, flex circuit and lead frame etching or plating industry, semiconductor
industry and fabric and knitting industry.
Service and Products supplied: Design, manufacturing and supply of Titanium
Anodes and Titanium Fasteners..
|
|
M/S Sabah Forest Industries Sdn. Bhd,
Malaysia
A proactive member of the HOB and contributor to (Sabah’s) green economy. SFI is a limited
liability company incorporated in Malaysia. The majority shareholder is Ballarpur Industries
Limited (BILT), (India’s) largest pulp and paper manufacturer. Sabah Forest Industries Sdn Bhd
produces printing and writing papers. It also offers duplicating and uncoated wood free
papers.
Service and Products supplied: Design
, manufacturing and supply of Titanium Fittings and Thermowells.
|
|
M/S Lafarge Cement Sdn
Bhd,Malaysia
A subsidiary of Lafarge Malayan Cement (LMC) the leader in the Malaysian cement industry.
Incorporated in 1950, its first cement plant was built in Rawang in 1953. LMC is today the
parent of a group of companies in Malaysia and Singapore whose core businesses are in the
manufacturing and sale of cement, ready-mixed concrete and other related building
materials.
Service and Products supplied: Design, manufacturing and supply of Alumina
Ceramic tiles and Bonding material.
|
|
Pusat Penyelidikan Mineral (Jabatan
Mineral Dan Geosains, Malaysia) / Minerals ResearchCentre, Ministry of Minerals,
Malaysia
A Malaysian Government Authority involved in Research activities on various minerals.
Service and Products supplied: Design, manufacturing and supply of 92%
Alumina Ceramic balls of assorted sizes.
|
|
M/S Sun drop Fruit Juices Bhd,
Malaysia
A renowned producer of Fruit Juices.
Service and Products supplied: Design, manufacturing and supply of Platinised
Anodes for the cathodic protection of various tanks.
|
|
M/S Coral Alliance Sdn Bhd,
Malaysia
A Malaysian Bumiputra Company incorporated in March 2005. Coral is licensed with the National
Oil Company, Petronas to provide integrated Brownfield services for the oil and gas and
petrochemical industries.
Service and Products supplied: Design, manufacturing and supply of spare
parts for Electrolysers used in Oil and Gas Industry by Petronas.
|
|
M/S Dynacraft Industries Sdn
Bhd
One of the largest manufacturers of lead frames, Dynacraft leads the industry in manufacture
and supply of microelectronic packaging system. A member of Hong Leong Group.
Service and Products supplied: Design, manufacturing and supply of various
types of Platinised Titanium Anodes.
|
|
University Technology
Malaysia
One of the well known universities in Malaysia.
Service and Products supplied: Design, manufacturing and supply of various
types of MMO Coated Titanium Anodes for their research project.
|
|
M/S Lambang Suria Sdn
Bhd,Malaysia
A well established Mechanical and Electrical Works contractor
Service and Products supplied: Design, manufacturing and supply of Gas
Chlorination System for one of their JKR project in Sarawak, East Malaysia.
|
|
M/S Midas Hardware & Engineering Sdn
Bhd,Malaysia
Wide range of products catering to industrial, corporate and household needs such as sanitary
wares, construction and building materials, hardware materials and more
Service and Products supplied: Design, manufacturing and supply of various
types of Alumina Ceramic Balls.
|
|
M/S Natural Analysis Sdn
Bhd,Malaysia
Operation of generation facilities that produce electricity.
Service and Products supplied: Design, manufacturing and supply of spare
parts for OEM SANILEC Electrolysers, Sacrificial and Impressed Current Cathodic Protection
anodes for their power plants in Malaysia.
|
|
M/S CV Surya Cahaya AbadiJl
Kalijaten,Indonesia
Engaged in the parts & equipment supply for wide range of industrial needs.
Service and Products supplied: Design, manufacturing and supply of Platinised
Titanium Anodes as part of their contract for supply of the spare parts for an Indonesian
Power Plant .
|
|
M/S Water Engineering Technology Sdn
Bhd,Malaysia
One of the leading Mechanical & Electrical engineering firm in the water and waste water
industry.
Service and Products supplied: Design, manufacturing and supply of Lakos
Centrifugal Separator for one of their water treatment projects.
|
|
M/S Chiyoda Sarawak Sdn
Bhd,Malaysia
Is an affiliated company of Chiyoda Corporation, Japan which is one of the leading global
engineering companies in the fields of LNG, petroleum and petrochemical industries.
Service and Products supplied: Design, manufacturing and supply of AODD ( Air
Operated Double Diaphragm Pumps).
|
|
M/S Perwaja Steel Sdn Bhd,
Malaysia
Malaysia's largest steel producer. It was established in 1982. It has two major plants in
Kemaman, Terengganu, and Gurun, Kedah. Perwaja is capable of producing 1,500,000 metric tonnes
of steel annually, comprising billets, beam blanks and blooms. From these, rolling operations
produce sections, H- and I- beams, bars, wire rods, channels, angles and nails.
Service and Products supplied: Design, manufacturing, supply and installation
of Alumina Ceramic tiles and Bonding material for various equipment like Iron Ore Discharge
Chute, Distributor Cone, Out let cone ,Iron Pressurised bin outlet cone etc.,
|
|
M/S H &T Industries Sdn Bhd,
Malaysia
Market leader in Surface Metal Finishing and Precision Heavy Engineering Services.and
Machinery Parts Manufacturer. Services also includes other engineering supply, repair,
modification and design of all type of Automated System cater for the Aluminum, Steel Mill,
Glass, Oil and Gas, Metal Stamping and Plastic Moulding, Auto Mobile, Wood, Electrical and
Electronic Industries.
Service and Products supplied: Supply of Titanium plates, pipes , fasteners
etc.,
|
|
M/S Aluputer Manufacturing Sdn Bhd,
Malaysia
Aluputer Industrial Pte Ltd has its beginning in the surface treatment industry. Established
in 1983, it caters to the more specific needs and high specifications of its clients in
surface finishing, ensuring quality and delivery at competitive cost. In 1993 Aluputer
extended its operations to Johor Bahru-Malaysia.
Service and Products supplied: Supply of Titanium plates, pipes , fasteners
etc.,
|
|
M/S HTP Limited Environment Company ,
Vietnam
A renowned supplier with core business in proving the equipment and spare parts for Power
Plants belonging to Electricity of Vietnam, Petro Vietnam Power Corporation and other
Industries in Vietnam.
Service and Products supplied : Design, manufacturing and supply of Chemical
handling PVDF pumps, Scrubbers for Gas Chlorination system .
|
M/S Fluor Daniel International (M) Sdn Bhd,Malaysia
Fluor Daniel International (Malaysia) Sdn. Bhd. operates as a subsidiary of Fluor Daniel
Caribbean, Inc.Fluor Daniel is a full service global engineering, construction and
maintenance contractor serving clients in the hydrocarbon, power, chemical plastics,
micro-electronics, healthcare and general manufacturing industries.
Service and Products supplied: Design, manufacturing andsupply of High
Alumina content Ceramic sleeves.
|
M/S Advanced Technology Materials , India
Advanced Technology Materials is a company comprise of highly qualified technocrats in
the field of advanced materials. The company has been setup with a mission to develop
unique, novel and techno-commercially viable technologies in the area of advanced materials
to cater the needs of R&D Institutes and Industries throughout the world.
Service and Products supplied : Design, manufacturing andsupply of
Tantalum cups and crucibles.
|
M/S EMU Engineering Sdn Bhd, Malaysia
EMU Engineering is involved in Industrial Machinery, Equipment and Supplies
Service and Products supplied: Design, manufacturing and supply of spare
parts for Electrolysers used in Oil and Gas Industry by Petronas.
|
M/S AEREX Sdn Bhd (Formerly Specialty
Equipment Division UMW Advantech S/B), Malaysia
AEREX Sdn Bhd is involved in the Design, Manufacture & Supply of Specialty Equipment and
Structures.AEREX was incorporated on September 1, 2009. The company acquired the
Specialty Equipment business unit from UMW Advantech Sdn Bhd effective February 1, 2010.
AEREX continues what was essentially UMW's Engineering and Fabrication business which has
been in operation since the early 70's.
Service and Products supplied: Complicated Titanium welding services for
thejoining ofvarious Titanium parts fabricated by the customer.
|
M/SCentral Sugar Refinery Sdn Bhd,Malaysia
CentralSugar Refinery (CSR) commenced business in 1965 under the name of aUnited Malay
State Sugar Industries: with an initial raw melting capacity of 150 metric tonnes a day.
Today, after decades of expansion and modernisation, the refinery achieves a melting
capacity of 1,500 metric tonnes a day.
Service and Products supplied: Design, Manufacturing and supply of
Sacrificial Cathodic protection anodes for prevention of corrosion in the badly corroding
process pipe lines.
|
M/SDoosan Hydro Technology,Korea
Doosan Hydro Technology is the U.S. based subsidiary of Doosan Heavy Industries &
Construction, a global company and leader in infrastructure services for the public and
private sectors. The strength of this relationship allows them to bond complex financial
projects, meet contractual agreements, exceed expectations and provide total water treatment
solutions. As a result, Doosan Hydro Technology can provide its clients and prospects with a
single source design, manufacturing of equipment, plant construction, commissioning and
operation for all types of water and wastewater treatment challenges.
Service and Products supplied: Design, Manufacturing and supply of spare
parts for various types of Centrifugal Pumps for one of their projects in Vietnam.
|
M/STNB Jana Manjung Power Plant,Malaysia
Operation of Generation Facilities that produce Electric Energy (SSM).The company is the
operator of coal-fired Manjung Power Station in Perak.The company is responsible for the
development of the largest coal-fired power plant in the country ie. the 2,100MW (3 x 700MW)
Power Station project in Manjung Perak Darul Ridzuan.
Service and Products supplied: Supply and installation of Electric valve
actuators to resolve the problem of frequent failing of existing Electric valve actuators.
Design,manufacturing,supply,installation,testing,commissioning and maintenance of ICCP after
removal of old existing ICCP system as part of major retrofit in 3 x 700MW power plants.
Supply of special alloy and SS tubes in large quantity for the Super critical Boilera
Super Heater and Reheater applications.
|
M/SP.U.B.( Public Utility Board), Singapore ( Johor River Water
Works)
The Johor River Waterworks(JRWW) extracts water from the Johor River upstream of Kota
Tinggi and is currently the largest source of supply of potable water to Singapore.
The Waterworks has three water treatment plants A, B and C, providinga total output of
250mgd (UK gallons). Plants A(60mgd), B (100mgd) and C (90mgd) was commissioned
in 2001 and uses advanced ozonation and biological filtration on top of conventional water
treatment
Service and Products supplied: Design,Manufacturing and supply of
Sacrificial Magnesium anodes for prevention of pipe line corrosion.
|
M/SYafah Enterprise Sdn Bhd, Malaysia
Yafah Holdings is a group of companies holding major shares in Chemical Industries,
Construction, Travel etc.Mainly produce chemical products such as ACH (Aluminium Chloride
Hydrate), PAC (Polyaluminium Chloride), which is supplied to National Water Agency for water
purification purpose and Household Chemical products.
Service and Products supplied: Design, manufacturing, supply,
installation, testing and commissioning of Chlorine Gas Leak Detection System for their new
Chlorine Gas Refilling Plant.
|
M/STop Glove (M) Sdn Bhd, Malaysia
Founded in 1991, Top Glove has come a long way from its humble beginnings. What started off
as a modest business venture of 1 factory, 3 production lines and 100 staff, has now emerged
as the world's largest rubber glove manufacturer, boasting 27 factories, 498 production
lines and a capacity of 43.9 billion gloves per annum.
Service and Products supplied: Design,manufacturing and supply of Air
Operated Double Diaphragm Pumps for pumping of latex..
|
M/S5N Plus, Canada
5N Plus ,Canada is the leading producer of specialty metal and chemical products. 5N Plus
deploys a range of proprietary and proven technologies to produce products which are used in
a number of pharmaceutical, electronic and industrial applications..
Service and Products supplied: Design, manufacturing , supply,
installation, testing ,commissioning, training and handing over of Chlorine Gas Distribution
systemfora SpecialtyRefinery Plantbeing set up by 5N plus in one of the ASEAN
countries. The refinery plantrequires pure chlorine distribution system in a very fine
and controlled manner.
|
M/STNB Pasir Gudang Power Plant, Malaysia
Operation of Generation Facilities that produce Electric Energy (SSM).The company is the
operator of Oil and Gas Fired Conventional as well as Combined Cycle Power Plants in
Johor.
Service and Products supplied: Supplyof Electric Ball valve actuators to
resolve the problem of frequent failing of existing Electric Ball valve actuators in Gas
Turbines. Supply of Equivalent motors as a replacement to expensive originally installed
motors by doing re engineering.
|
M/SLAMBDA Engineering (M) Sdn Bhd, Malaysia
An established supplier of equipment to various chemical industries located in Central
Malaysia.
Service and Products supplied: Design,manufacturing and supply of Titanium
Plates on a regular basis.
|
M/SDEWON (M) Sdn Bhd, Malaysia
An established supplier of equipment to various chemical industries located in Eastern
Malaysia.
Service and Products supplied: Design, manufacturing and supply of SS
Thermowells with Tantalum sleeve on a regular basis .
|
M/SEVERTS (M) SDN BHD
An established and only manufacturer of Balloons in Malaysia.
Service and Products supplied: Design, manufacturing ,supply and
installation of Alumina Ceramic Lining for Ball Mill used for preparation of Titanium
Dioxide
|
M/SUNIVERSITY TENAGA NASIONAL
(UNITEN) is Malaysian private university. It is wholly owned by the
public-listed Tenaga Nasional Berhad(TNB), one of the largest
utility companies in South East-Asia. Service and Products supplied:
Welding of Titanium Plates and cutting specimens for a research project.
|
M/STITILATEX SDN BHD
A renowned manufacturer of rubber gloves. Service and Products
supplied: Design, manufacturing, supply and installation, testing, commissioning
of Chlorine Gas Leak Detectors
|
M/SMULTI SUPPLY ENGINEERING & TRADING
An established supplier of products ranging from Industrial Products, Engineering
Equipment, Industrial Automation Parts, Material Handling Equipment, Coupling &
Industrial Timing Belts and among others from worldwide countries like Japan, Korea, Europe
and others that widely satisfy all the needs in various market sectors.
Service and Products supplied: Design,manufacturing and supply of LAKOS
Centrifugal Separators ( for end user Proton Cars)
|
M/S MALAY-SINO CHEMICAL INDUSTRIES SDN BHD
A leading manufacturer of chlor-alkali products in Malaysia. The Company was formed to meet
the growing needs for basic chemicals in the country. Service and Products
supplied: Manufacturing and supply of Titanium and Nickel Fittings, Blowers made
of FRP for Caustic Soda Plant
|
M/S BRB SILICONE SYNTHESIS SDN BHD
BRB International BV is a dynamic and innovative company experienced in providing technology
solutions with Silicones, Additives, Chemicals and Lubricants. BRB International BV has
grown to become one of the largest, independent and privately owned businesses of its kind,
in the world. Service and Products supplied: Manufacturing and supply of
Air Operated Double Diaphragm (AODD) Pumps ,Centrifugal Pumps for High Temperature Thermic
Fluid applications, PP (Poly Propelene) Pumps and Gear Pumps.
|
M/S FORMTECH ENGINEERING (M) SDN BHD
Is an MNC which is established in Arab Malaysian Industrial Park, Nilai. A unique
manufacturer of various types of formers for Glove Industry and other industries.
Service and Products supplied: Manufacturing and supply of Alumina Ceramic
Grinding Media.
|
M/S ANSELL NP SDN BHD
A world class manufacturer, manufacturing Gloves (Medical Examination), Surgical Gloves
(Natural and Synthetic Latex).Service and Products supplied: Manufacturing
and supply of Air Operated Double Diaphragm (AODD) Pumps, Specially Designed Vacuum Pumps,
Gas Chlorination system and its spare parts.
|
M/S A1 GLOVE SDN BHD
Incorporated on 25 August 2009 it is another important milestone for Titi's Group of
Companies which enable the group in becoming a world-class, most reliable in quality and
competitive Latex Examination Glove Manufacturer. Service and Products
supplied: Design, manufacturing ,supply and installation of Chlorine Gas Leak
Detectors, Cyclone separators, Air Operated Double Diaphragm (AODD) Pumps
|
M/S YAMATO TECHNOLOGIES PTE LTD, SINGAPORE
The company is focusing on service support & project management for marine, offshore,
manufacturing and process industries requirement with core competencies in Hydraulic
Systems, M&E and Energy Systems, Yamato Fumigation System and Yamato Fumigation Technologies
Service and Products supplied: Design,Manufacturing and supply of High
Energy Arc (HEA) Ignitors for Bio Gas firing.
|
M/S PT Samba Jaya,Indonesia
Engaged in the parts & equipment supply for wide range of industrial needs.
Service and Products supplied: Design, manufacturing and supply of MMO
Coated Titanium Grounding Probes for OEM Denora, Italy designed Electrolysers for a an
Indonesian Power Plant .
|
M/S HARTALEGA NGC SDN BHD
A world class manufacturer, manufacturing Gloves (Medical Examination), Surgical Gloves
(Natural and Synthetic Latex). Service and Products supplied: Design
,manufacturing and supply of Emergency Repair Kit for Chlorine Gas System,Air Operated
Double Diaphragm (AODD) Pumps, Gas Chlorination system and its spare parts
|
M/S TENAGA TIUB SDN BHD
Since inception in 1988, has been growing as a successful EPCC project executing company in
oil and gas sector. Service and Products supplied: Design ,manufacturing
and supply of Sacrificial anodes for their projects.
|
M/S BASF (Malaysia) SDN BHD
There shall be no introduction required for BASF who is a leader in chemical plants.
Service and Products supplied: Engineering, Design ,manufacturing and supply
of Alumina Ceramic Rollers to resolve their problem with smooth handling of polymers for their
Pasir Gudang Plant.
|
M/S ANDRITZ HYDRO GmbH, Austria
Leaders in Hydro Power Power Plant as ECP contractor.
Service and Products supplied: Design and supply of Cyclone ( Centrifugal
Filters) for their Andritz Ulu Jelai Project Sdn Bhd to resolve cooling water supply
impurity issue.
|
M/S METEK KITAMURA (M) SDN BHD
A well established Japanese organisation specialised in Electroplating with their plant
incorporated in Malaysia. Service and Products supplied: Design
,manufacturing and supply of MMO coated Titanium anodes for Electroplating service and also
regular recoating (MMO coating) on the exhausted anodes on a monthly basis.
|
M/S CCM CHEMICALS (M) SDN BHD
In Malaysia, there shall be no introduction required for CCM who is a leader in chlor-alkali
products with their plant located in Pasir Gudang, Johor Darul Takzim.
Service and Products supplied: Manufacturing and supply of Titanium pipe
and fittings in large quantity for their new plant and installation of Aluminium Bus bar
rated for 16.2kA DC / 400V DC for their new two stream of Electrolysers.
|
M/S KIMANIS POWER SDN BHD
KPSB which is a subsidiary of PETRONAS Gas Berhad (PGB) located in Sabah with Combined Cycle
Power Plant of capacity ( 3 x95MW) . Service and Products supplied:
Manufacturing and supply of Transparent Electrolyser Casing to enable the user to visually
inspect the oxide deposits inside the cell. Training and knowledge sharing services for its
O&M Team for Operation and Maintenance of Electro chlorination Plant, Generators, Battery
banks,Transformers and Switch Gears.
|
M/S HANWHA Q CELLS
Hanwha Q CELLS is a world renowned manufacturer of Solar Cells with HQ in Korea and big
manufacturing plant located in Malaysia. Service and Products
supplied: Due diligence service to the customer, by a 275kV Competent Electrical
Engineer with 28 years experience in Power Plant O&M, to assess 275kV / 33kV Substation
Equipment bought as new but not used and planned to sell.
|
M/S YTL Perak Hanjoong Cement Sdn Bhd, Malaysia
A second largest cement manufacturer in Malaysia with Three Cement plants in different
locations in Malaysia. It also has operations in China and Singapore.Incorporated in
1960,whose core businesses are in the manufacturing and sale of cement, ready-mixed
concrete and other related building materials.
Service and Products supplied : Design, manufacturing, supply and
installation of Alumina Ceramic padded pulley lagging for conveyor belt pulleys.
|
M/S ST MICROELECTRONICS SDN BHD
There shall be no introduction required for ST Microelectronics who is a leader in
semiconductor manufacturing, with plants located in different parts of the world. One of
such plants STMicroelectronics Muar is located in the north part of Johor state which is
situated in the south West Coast of the Malaysia peninsula. In over 39 years of operation,
Muar site has grown from a small facility to a world class automated semiconductors
manufacturing plant.
Service and Products supplied : Engineering, Design ,manufacturing and
supply of Zirconia Ceramic Pins for Pulleys used in their manufacturing facility to resolve
their problem of high wear and cost
|
M/S Hyflux, Singapore
A global leader in sustainable solutions, focusing on the areas of water and energy. A
specialist in water treatment and among the top global desalination plant providers, The
Groupa track record includes Singaporea first water recycling plant and two seawater
reverse osmosis (SWRO) desalination plants, and some of the worlda largest SWRO
desalination plants in Algeria, China, Oman, Saudi Arabia and Singapore. The Group is also
developing Asiaa first Integrated Water and Power Project and Singaporea largest
waste-to-energy plant.
Headquartered and listed in Singapore, Hyflux has operations and projects spanning across
the Asia Pacific, the Middle East, Africa and the Americas.
Service and Products supplied : Design, manufacturing, supply and
installation of Electrolyser for its Electrochlorination plant ( 2 x 17.5kg/hr) in Tuas
Spring Desalination Plant; Design, manufacturing ,supply and installation of Gas Chlorinator
for its Gas Chlorination plant ( 2 x 20kg/hr) in Sing Spring Desalination Plant.
|
M/S FLUX O.S SDN BHD, Brunei
FLUX Group of Companies comprises of two subsidiaries namely FLUX Integrated Solutions and
FLUX O.S. Sdn Bhd. To cater market demands and as part of a focused expansion, FLUX
Integrated Solutions was re-registered in 2016 as FLUX Integrated Solutions Sdn Bhd. FISSB
is Brunei Darussalama first Laboratory to provide Calibration & Measurement services to
the Oil & Gas Ancillary Industries. Whereas FOSSB specialises in delivering onshore well
intervention and drilling services.
In addition to delivering world-class quality products and services, the organization
operates in line with the objectives of Bruneia Vision 2035 to stimulate economic growth
and to develop highly skilled local Bruneians. Flux Group also strives to diversify and
establish operations internationally.
Service and Products supplied :Design, manufacturing, supply of Magnesium
anodes for Cathodic Protection.
|
M/S Sembcorp Cogen Pvt Ltd and Sembcorp Industries Ltd,
Singapore
A Leading Energy, Marine and Urban Development Group
Sembcorp Industries is a leading energy, marine and urban development group, operating
across multiple markets worldwide.
As an integrated energy player, Sembcorp have a balanced energy portfolio of over 12,400
megawatts, including thermal power plants, renewable wind and solar power assets, as well as
biomass and energy-from-waste facilities. In addition, Sembcorp is a world leader in
offshore and marine engineering, as well as an established brand name in urban development.
Sembcorp Industries has total assets of over S$23 billion and over 7,000 employees. Listed
on the main board of the Singapore Exchange, it is a component stock of the Straits Times
Index, several MSCI and FTSE indices, as well as the SGX Sustainability Leaders Index and
the Dow Jones Sustainability Asia Pacific Index
Service and Products supplied :Design, manufacturing, supply, installation
and commissioning of Electrochlorinators.
|
M/S VALE MALAYSIA MINERALS SDN BHD
Vale Malaysia Minerals Sdn Bhd a a unit of Brazilian mining giant Vale SA, the worlda
largest iron ore producer has its Teluk Rubiah Maritime Terminal iron ore distribution hub
in Lumut, Perak.
China is its biggest Asian customer and revenue contributor. With its Teluk Rubiah hub,
which began operations in Oct 1, 2014, had shortened the shipping time of its iron ore to
China to 10 days (from Malaysia), previously, it needed an average 30 to 40 days to ship
from Brazil.
Service and Products supplied :Services for ICCP inspection and assessment
and Steel Piles inspection.
|
M/S JIMAH EAST POWER SDN BHD
The Jimah East power project (2 x 1000MW), also known as the Tuanku Muhriz power station, is
a 2GW ultra-super critical coal-fired power station located in Port Dickson, Negri Sembilan,
Malaysia.
The two-unit thermal power plant is owned and operated by Jimah East Power (JEP), a joint
venture of Tenaga Nasional Berhad (TNB, 70%), Mitsui (15%) and Chugoku Electric Power (15%).
Service and Products supplied :Manufacturing, supply, installation,
testing and commissioning of Specially designed / manufactured Super Abrasive Resistant
(SAR) Conveyor Belts for the purpose of transferring highly abrasive coal ash from the
bottom ash hoppers.
|
M/S TNB Prai Sdn Bhd (Perai Power Plant), Malaysia
A subsidiary of Malaysiaa National utility company Tenaga Nasional Bhd (TNB) located at
Northern part of Malaysia.It is
1071MW Combined Cycle Power Plant.
Service and Products supplied :Supply of spare parts for Sea water intake
systema ICCP (Impressed Current Cathodic
Protection System). Design,fabrication and supply of tailor made Impressed Current Cathodic
Protection (ICCP) anodes and
reference electrodes.
|
M/S WESTPORTS MALAYSIA SDN BHD
Strategically located along the Straits of Malacca, Westports today has positioned itself as
the apit stopa for Container vessels
plying the worlda busiest shipping lane. Westports is not only a leading port in South
East Asia, but also one of the top ports in
the world in terms of productivity. Consistently rated as one of the worlda most
productive ports,
Service and Products supplied : Supply of various Electrical,
Instrumentation and Mechanical spare parts for various critical
equipment.
|
M/S SESB, STESEN JANAKUASA HIDRO TENOM PANGI, Sabah,
Malaysia
The Tenom Pangi Hydro Power Station (SJHTP) owned by Sabah Electricity Sdn Bhd (SESB). Tenom
Pangi Dam is a
hydroelectric plant in Tenom, Sabah, Malaysia. It is located 120 km south of Kota Kinabalu
on the Padas River. The project is a
run-of-river hydroelectric power plant. Tenom Pangi Dam is the only major hydroelectric dam
in Sabah. The power station has
three turbines of 22 MW installed capacity totaling 66 MW.
Service and Products supplied :Supply of spare parts for Turbine. Highly
specialised Self Lubricated Bearings.
|
M/S MAM Minerals Sdn Bhd
MAM Mineral’s forte is mining & processing of Iron Ore from mines across Malaysia. MAM
Minerals, has assimilated a large
number of mines across Malaysia. MAM Minerals have deployed Iron Ore Mining Machinery and
Manpower that can mine
more than 48,000 MT per day of raw materials and is in the midst of scaling up its
activities to mine more than 100,000 MT per
day of Quality Iron Ore (Fe 62+).
Service and Products supplied :Supply of various Electrical,
Instrumentation and Mechanical spare parts for various critical
equipment and also Technical services to study, analyse and offer suitable solutions for
various problems in the equipment and
process.
|
M/S Kawan Engineering Sdn Bhd under the group of KAWAN RENERGY
BERHAD
Kawan Renergy Berhad, capitalising on the specialisation of their subsidiaries, we position
themselves as an engineering
solutions provider with a plethora of specialisations.
Group's capabilities include providing in-house fabrication, design, installation,
and/or commissioning of the industrial process
equipment, process plants as well as renewable energy and co-generation plants.
There are three principle activities in their Group. First, Industrial Process Equipment
including Heat Exchanger, Pressure
Vessels, and Heaters & Boilers. Secondly, Process Plants including Food Processing,
Oleochemical & Chemical Processing,
and Waste Recovery. These two principle activities are operated by Kawan Engineering Sdn
Bhd.
The third principle activity consists of Renewable Energy and Co-generation Plants. This
includes Co-generation and Tri-
generation, Biomass, Combined Cycle, Biomass / Landfill, Waste Incineration, and Organic
Rankine Cycle. This business is
operated by Kawan Green Energy Sdn Bhd.
Service and Products supplied :Supply of specially designed and fabricated
Magnesium Anodes for Sacrificial Anode
Cathodic Protection of various vessels .
|
M/S TNB, Southern Power Generation Sdn Bhd
TNB’s subsidiary SOUTHERN Power Generation Sdn Bhd (SPG) supply 1,440MW of electrical power
into the national grid
from its two 720MW combined cycle gas turbine (CCGT) power plants.
Service and Products supplied :Supply of spare parts for Generator Bus duct
drier system.
|
M/S TNB Jana Manjung Power Plant,Malaysia
The company is the operator of coal-fired Manjung Power Station in Perak. The company is
responsible for the development of
the largest coal-fired power plant in the country ie. the 2,100MW (3 x 700MW) Power Station
project in Manjung Perak Darul
Ridzuan.
Service and Products supplied :Under LTSA ( Long Term Services Agreement) ,
providing services for Maintenance of ICCP
of 3 x 700MW since year 2021 until year 2027 including supply of spare parts for the ICCP.
|
|
|
|
|
|
|
- Electrochlorinators
- Any equipment made out of precious materials
TITANIUM, TANTALUM, NIOBIUM, ZIRCONIUM, NICKEL, HASTELLOY, MONEL, INCONEL, X-750,
PLATINUM, RUTHENIUM, IRIDIUM, PALLADIUM and its alloys
- Cathodic protection anodes of any shape
- Alumina Ceramics for Corrosive fluid handling
|
|
|